Antistatic
Material
Antistatic Packaging Bags
Permanently antistatic transparent bags meet MIL-B-81705B,
Type II. They are available in 4 and 6 mil thickness, can
be stored indefinitely and are cleanroom acceptable.
Zip-Lock
Antistatic Bags
 These
transparent bags qualify as electrostatic discharge prevention
per DOD Standard 1686 and DOD Handbook 263, and meet static
decay rate provision of MIL-B-81705B. Clean-room safe. Sizes
4”W x 6”L to 12” x 12”.
Benstat®
Bags
These transparent bags are available in 4 and 6 mil thicknesses
and meet all ESD requirements of MIL-B-81705B, Type II. Clean-room
acceptable. Can be stored indefinitely. 2 mil bags and custom
sizes available.
Metallic Antistatic Bags
When grounded, this 3-layer, static shielding metallized bag
creates a Faraday cage; sizes 3 x 5” to 15 x 18”.
Cushioned
Shield Bags
Three-layer bubble-cushioned bag with metal-foil center protects
against ESD, EMI, RFI, shock, impact and vibration.
Reusable
Black Antistatic Pouches
Multi-wall configuration with bubble cushioning; polymer construction
creates Faraday-cage effect. Various sizes.
Antistatic-Foam
Shield Bags
Combines cushioning foam with RFI and EMI shielding. Various
sizes.
Centurian® Coating
Benefits
 Centurian
is a water-based graphite coating that ensures a high safety
level for costly ESDS materials by providing a barrier from
static charge. It is available on most corrugated products,
including regular slotted cartons, die cuts, tote boxes and
more. Centurian is not only a cleaner and safer product to
inventory and handle, but non-flammable and non-explosive,
as well.
Caddy-Pack® Transporters
 These
transporters immobilize components to eliminate sliding or
shifting and facilitate hands-off handling. A Hook ‘n’
Loop™ recloseable system for easy access and security.
ESD performance is safequarded. Available in Kraft and Kraft
Foil.
Conductive Tabletop Laminate:
• Zero voltage suppression,
total charge drainage
• Resistant to heat, chemicals and most solvents
• Meets DOD Handbook 263; MIL-B-81705B, FTMS 101B,
Method 4046
• Cleans with soap and water
|
Conductive
Floor/Table Mats:
• Permanent dissipative, independent
of humidity
• Clean-room safe
• Non-slip matrix; cleans with soap and water
• Pre-cut 24” or 48” wide, or 50”
rolls
Thermoform Staticure®:
• Both sides of package static
dissipative
• Both sides non-contaminating
Staticure® is
a Registered Trademark and proprietary
process of Metallized Products, Inc.
Wrist & Grouning Straps:
• Grounds staff at work stations
• Connects to work area, floor and table mats.
• Non-irrative material
Wrist-Strap Tester:
• Protects against static damage
• Lightweight
• Tests 270 K or 1 meg resistor stops
Pocket Megohm Meter:
• Advanced silicon-gate ASIC
electronics
• Safe, accurate, easy to use
• Compact, lightweight, rugged
• Over 1,000 tests on single charge
ION Air Blower:
• Ultra-efficient laminar flow
• High output creates rapid chart dissipation
• Non-nuclear; no harmful ozone
• Swivel base
Other Conductive Products Available:
• Antistatic foam cushioning
• Antistatic bubble cushioning
• Antistatic cleaner
• Non-nuclear static locators
• Black nylon conductive bags
• Conductive foam that’s humidity-independent
• Portable conductive workmats
• Conductive tote boxes & product bins
• Conductive shunt bars for PC boards
• Transparent conductive bags
Conductive Corrugated
This
material can be coated on 1 or 2 surfaces with a conductive
ingredient which dissipates electrostatic charges. It can be
made with removable cell partitions and liners. A high luster,
dust-free coated surface is available for clean room requirements.
Specifications
Surface Resistivity: 103 –
106 ohms/sq. inch
(ASTM Test Method D257)
Electrostatic Decay Rate: 0.36 second (Test Method 4046, Federal
TMS 101B; meets electrostatic requirements of MIL 81705B)
Physical Data
The conductive material is
non-flammable, non-explosive and can be manufactured in single
wall, double wall or “E” flute corrugated.
|
